Friday, April 5, 2013

Update from the Duffel Trenches #2: A finish!

I'm a bit surprised to tell you that I've finished up my StudioCherie duffel! I was fully expecting that it would be a more way more time-consuming and frustrating process than it was. I'm quite pleased with the finished bag, though if I were to make the bag again another time, I would probably use a heavier batting, like upholstery weight, to create a stiffer finished bag. On my bag, I used Pellon Legacy 100% cotton batting, which yields a softer finished bag with less body, but when it's stuffed to the brim, like it is in the photos, there's plenty of body.

Finished duffle - front view

After my last update, I first tackled the straps, which was a relatively painless step. Installing them was equally straight-forward. Even installing the top zipper was a cinch...I didn't get tripped up in the pattern until I got to Step 9 with the zipper stop tabs. I broke one of the cardinal rules of sewing a bag pattern - I didn't read the entire pattern before getting started, so I didn't realize that there were actual pattern pieces at the back at the pattern, as there were rotary cutting instructions for the bag. Whoops! I actually asked another person who blogged about having made this bag, Sara of Knottygnome, who helped me figure out the step 9 instructions before I discovered the pattern pieces. The pattern pieces would have made everything make perfect sense.

Lining up the straps

Step Eleven was the only truly maddening step - lining up all of the bag parts and sewing them together was not exactly fun, but it was also not the horror that lining up all of the pieces of my Weekender was. There's a few less layers in this bag, so it wasn't anywhere near as challenging. I also used my Juki for all of the straight stitching on this duffel, and it sewed right through those layers as though it was just two layers of quilting cotton. No broken needles, no hesitation - this machine is perfect for bag-making!

Pressing the raw edges of the straps under

So, now that it's done, what can I tell you about this bag...well, first off, this thing is huge! I fully expect that I'll be able to pack not only my projects for the Stash Bash retreat next week but also all my clothes in this bag. I tested it out with quilts inside and found that it can easily fit four lap sized quilts, maybe even more. This is a great bag for a weekend trip, and I believe the size is an acceptable carry-on for most airlines.

Installing the side zip

I also love the fabric I used - I wasn't sure about the orange Sketch for the handles, but it really does work nicely with the penguins, so I'm pleased with it. And these penguins always seem to make me smile.

Finished duffle - top view

The main thing I don't love about this bag are the raw edges on the inside of the bag, which I couldn't seem to get a decent picture of. I overcast the edges as best I could with my Viking, but admittedly, I stink at overcasting, so it's not a perfect job. Then again, how often am I going to be looking at the interior of the bag? Probably not very often, so it's definitely something I can live with.

Installing the side zip

Another thing I'd do differently next time is repeat the pockets that are written to be just on two of the four sides of the bag. I would repeat the zipper pocket that is on one short side of the bag on the other short side of the bag, and I'd also repeat the small pocket between the handles on both long sides of the bag. You can never have too many pockets :)

Finished duffle - side view

I've gotten a lot of questions about where I sourced all the materials for this bag, especially the long zippers and the jute, so here's the rundown on where I got everything:
Zippers: Purl Soho

But all in all, I'm going to be a very happy camper carrying this bag around when I travel! I may even make another manly version at some point for my husband, since he travels infinitely more than I do. I hope you all have a wonderful Friday and a great weekend!
Wednesday, April 3, 2013

Charm Madness: The Double Hourglass Pouch Tutorial

Welcome to my stop on the Charm Madness blog hop, hosted by Sew Lux Fabrics! To catch up on previous Charm Madness posts and enter the weekly giveaway, visit the Sew Lux blog. Today, I'm sharing a simple tutorial to create a great zippered pouch, perfect for carting around a hand sewing project or for packing in your suitcase for your next trip. Today's project will use a total of just 16 charms, plus a fat quarter for your lining and a fat eighth for your sashing.

Double Hourglass Pouch tutorial - live on the blog today as part of Charm Madness


The Double Hourglass Pouch
**Use a scant 1/4" seam unless otherwise noted**

You'll need:
(8) 5" charm squares of white/neutral fabric
(2) 5" charm squares of four different prints, total of (8) charm squares
     I used prints from Cosmo Cricket's 2wenty-Thr3e collection 
fat eighth of sashing, cut into:
     (2) 1 1/2" x 8"
     (1) 3 1/2" x 10 1/2""
     (1) 1 1/2" x 10 1/2"
10" zipper
fat quarter of lining, cut into:
     (2) 10 1/2" x 12"
1/3 yd Pellon Craft Fuse, cut into:
     (2) 10 1/2" x 12"

IMG_4873rt

To piece the patchwork for pouch front:
1) To begin, cut two planks measuring 1 3/4" tall by 5" wide from each of your charms, creating a total of 16 white planks and 16 print planks. Don't toss aside the skinny remaining strip of your printed charms, we will use some to make the zipper tabs.

IMG_4877rt IMG_4878rt

2) Take four matching print planks and four white planks and sew together in pairs, print to white. If your prints are directional, keep in mind that you want two identical pairs with the print on top, and two pairs where the print is on the bottom. Press seams open.

IMG_4881rt

3) Bring assembled pairs to your cutting table, and using the 45 degree marking on your ruler, trim. Align the 45 degree marking along the raw edge of the bottom of your patchwork, and trim. Flip the ruler to create the opposite side of the triangle, and trim. You're now left with a triangle. Discard the scraps and repeat with the three remaining patchwork sets, creating two sets of identical triangles as shown.

IMG_4883rt IMG_4884rt

IMG_4885rt

4) Lay out your block and assemble, pairing two opposite triangles together and joining, pressing seams open, and then joining the two halves of the unit to create a whole patchwork block. Use pins at to assist you in making your seams meet, as needed.

IMG_4892rt

IMG_4891 IMG_4896rt

5) Repeat with remaining print and white planks to create four double hourglass blocks.

6) Lay out your four blocks as desired, twisting and turning them if you like. Sew the blocks together first in rows, then join the rows. Press seams open.

IMG_4897rt

7) Join a skinny sashing 1 1/2" x 8" strip on the right and left of the block. Press seams open.

IMG_4904rt

8) Sew the skinnier of the two remaining sashing pieces to the top of the block, then sew the larger, 3 1/2" x 10 1/2" piece to the bottom.
IMG_4909rt

9) Next, take one piece of Craft Fuse and place the shiny side with the wrong side of the pouch front. Using a hot iron, fuse the Craft Fuse in place. Repeat for the pouch back.

To install the zipper:
1) First, we need to trim the zipper to size. The zipper should be exactly 1 1/2" shorter than the top of the pouch, so trim as needed. I trimmed off from the zipper stop side of the zipper, rather than the top of the zipper.

IMG_4922rt

2) Next, choose two leftover print planks and trim to 2 1/2" long. Press each of the two pieces first in half, then fold in half and press a second time, much like a double-fold binding.

IMG_4916rtIMG_4917rt

3) Open the zipper tab sandwich and insert the end of your zipper, taking care to align the end of the zipper inside the sandwich. Sew the sandwich closed, topstitching about 1/8" from the sandwich edge.

IMG_4923rt IMG_4926rt

IMG_4925rt

4) Repeat step 3 for the top edge of the zipper, first unzipping the zipper to get the pull out of your way.

5) Trim zipper tabs even with the length of the zipper.

zipper trim

6) Next, align up one of your lining pieces, right side up, on your cutting mat, lining up the sides of the of the lining piece with the lines on your cutting mat. Place the zipper on top, zipper pull up, centering the zipper so that the zipper is approximately 3/4" from both the right and left edges of the lining. Put some pins in place, close to the zipper teeth, to keep the zipper in place and bring to your sewing machine. Set the stitch length at 5.0 mm and baste the zipper in place, sewing very close to the raw edge of the fabric.


IMG_4930rt


IMG_4931rt

7) Bring the zipper/lining unit back to your cutting mat and align the raw edges of your pouch front with the lining, right sides together. Pin in place, and try to get those pins as close to the zipper teeth as possible.

IMG_4932rt

8) At your machine, adjust the stitch length back to a 1.5-2.0 mm stitch, whatever you normally sew with. Rather than starting at the raw edge, start about 3-4" down - away from the zipper pull. We'll go back and attach that section in a moment. Sew the pouch front, zipper, and lining together, using your zipper foot. Sew all the way to the end of the zipper, then clip the threads.


IMG_4938rt

9) Open up your pouch so far, so the right sides of your fabric face you, and unzip that zipper. Get the zipper out of your way, then close the pouch back up, line up the raw edges again, and sew the remaining part of the zipper in place. Make sure to backstitch when you reach your first line of stitching.

IMG_4935rt

10) Using a hot iron, press the pouch front and lining away from the zipper, then topstitch in place.


IMG_4941rt IMG_4943rt

11) Next, we'll attach the remaining pouch parts. First, line up the remaining lining piece, just as we did in step 6, and align the zipper (now attached to the pouch front and one piece of lining) with the raw edge of the lining, again centering the zipper, with the lining right sides together. Pin as needed.

IMG_4945rt

12) Baste the zipper and second piece of lining together, using that longer stitch length, then align the pouch back, right sides together with the pouch front, and pin as needed. Sew the zipper in place, using the same method we did in steps 8-9, sewing part of the zipper in place, and then opening the zipper to get it out of your way.

Alternately, you can attempt to open the zipper while sewing, lifting your presser foot, and rotating your pouch to finagle the zipper. Use whichever method works best for you.

IMG_4949

13) Press the pouch back and lining away from the zipper and topstitch.


IMG_4951rt

Finishing the pouch:
1) Now that the zipper is fully installed, we can finish up the pouch. This is the most important step of this tutorial - open the zipper at least 3/4 of the way. If you open it up all the way, the zipper pull may get in your way, so I usually open the zipper right about 3/4 of the way open. 


IMG_4954rt

2) Next, line up the raw edges of the lining with each other, right sides together, and ditto for the pouch front and back. Pin the raw edges together, leaving a gap on the lining bottom about 5" long - enough for you to shove your hand in and pull the right sides of your pouch out. I mark the start and stop of the gap with two pins, so that I know where to start and stop my sewing. 

IMG_4955rt

3) At the zipper, match up the raw edges, and pin. Push the zipper tabs toward the lining to keep them out of your way. Sew together, using a 1/2" seam allowance, and taking a moment to backstitch at the lining gap start and stop.

IMG_4956rt

4) Reach into the lining through the gap we left in step 14, and reach for the pouch front. Pull the fabric through the gap, turning the pouch right side out. As you do this, make sure to push the corners out. Feel free to use a wooden turning tool, or even a pencil eraser, to try to push the corners out fully. Make sure also to push out the corners at the zipper end of the pouch. Repeat for the lining once you get the pouch front/back squared away.

IMG_4958rt

IMG_4961rt

3) You'll notice that the gap that you left in the lining already wants to close up, and may even start to align itself properly. Take a moment to fold the raw edges under, approximately 1/2", and sew the gap closed, either via handstitching or topstitching. I almost always topstitch, just for added security at the bottom of my pouches.

IMG_4963rt

4) Finally, push the lining into the pouch, and marvel at your finished pouch!

IMG_5022rtsquare

If you make a pouch using this tutorial, be sure to post it to my Flickr group or Threadbias group, I'd love to see it! 

Don't forget that Charm Madness is still underway - you can link up your own project made from charm squares here, enter the weekly giveaway at the Sew Lux blog on Sunday, and enter the Grand Prize Giveaway by tallying up all the charm squares used in the Charm Madness tutorials, also at the Sew Lux blog. Have a wonderful Wednesday! 

Charm Madness at Sew Lux Fabric
Monday, April 1, 2013

Update from the Duffel Trenches #1

I've spent the last several days off an on working on my StudioCherie duffel bag. I've officially made it to step 4 of the pattern, strap preparation, so I'm going to share how the first few steps have gone.

Crosshatch quilting in progress

Step 1: Quilting and sizing the quilted pieces
Admittedly, I probably went overboard with the quilting. The instructions regarding the quilting were quite sparse, and I like quilting, so I spent a good bit of time adding lots of quilted flair to the two pieces that were intended to the be quilted. I've got straight-line quilting, I've got cross-hatch quilting, there's some scrolls, some clamshells, some stippling, really a little bit of everything. The quilting went rather well, until I got to the sizing. After quilting, I simply didn't have the size I needed to trim to, so I'm going to have to alter the pattern as I go. Next time (if there's a next time) I make one of these duffels, I will cut my feature fabric, batting, and lining at least 1-2" larger all the way around to allow for some shifting and such on the large piece. The smaller quilt seemed to come out just fine, so perhaps I wouldn't do that with that one, but I've made a note on my copy of the pattern.

Quilting - check!

The instructions then indicate to either serge the edges of the quilted pieces or to add binding to them. I thought (for about two seconds) about binding them, because the way I understand the construction of this bag, the edges will be visible from the interior of the bag, but decided against it and zigzagged the edges with my Viking.

Zigzagging edges

Steps 2 & 3: Marking the big quilted piece and Marking the small quilted piece
Marking was relatively easy and painless. The pattern gives some great visual cues on how to properly mark the pieces, so I think I'm all set on this front. We'll see how it goes when I actually need to see my markings in a few steps!

Next up is the strap preparation. This will be my first time working with jute for bag straps, so it should prove to be interesting. I wasn't able to source my jute webbing locally, I had to buy it online, so the color isn't quite what I would have wanted if I'd found it in person, but I think it will work out okay. Now that I've trimmed up my orange Sketch fabric for my straps, I'm liking it much better, and I think it will be a nice accent to my penguins. Stay tuned for more gory details as I make my way through this bag! Have a great day :)

Up next: straps!

Welcome! I'm Elizabeth, mom to a mood teen boy and a chatty six-year-old girl and I sew for my sanity. Let's get to quilting, shall we?
The Epic Sampler BOM Club kicks off Oct 1st
Copyright 2010 by Elizabeth Dackson. Powered by Blogger.

Search This Blog

Tutorials

 photo Icicle-Star_zps7f032133.gif  photo Boxed-In2_zps800ae9da.gif EasyPeasyFauxZigZag StringHeartBlock StarCrossed CrossMAze CathedralStar RainbowRing DoubleFlip PatchworkWheel FriendshipOctogon FlyingGeese HST Weathervane MarinersStar StackedScrappyBlock ScrappyAngles HolidayPresentBlock DivideandConquer CharlestonFarmhouse ModernHalves ModCircuitry ModNine Kaleido SlicedCoins Kaleido BellaCrossing SweetGirlie MiniBookshelf ClamshellLoop DoubleHourglass BaptistFan TetrisMug StringDiamond ScraptasticTote OffsetDiamonds MunchkinSoftBook PatchworkBathMat